Cases and accessories | RanchoTransaxles.com

DTF 002 Replacement Bellhousing

Bob Clark — Thu, 10 Mar 2022 18:14:26 +0000

Rancho Performance Transaxles is now offering premium grade, direct replacement DTF bellhousings for use in 002 applications. Bellhousings are custom...

The post DTF 002 Replacement Bellhousing first appeared on RanchoTransaxles.com.

Stock Replacement pinion nut

Bob Clark — Mon, 18 Mar 2019 14:52:08 +0000

Stock replacement pinion nut

The post Stock Replacement pinion nut first appeared on RanchoTransaxles.com.

Chromoly 4-Bolt Pinion Retainer Early

Bob Clark — Mon, 25 Feb 2019 19:19:14 +0000

Chromoly 4 bolt early pinion retainer

The post Chromoly 4-Bolt Pinion Retainer Early first appeared on RanchoTransaxles.com.

Cromoly Pinion Retainer Nut Late

Bob Clark — Mon, 25 Feb 2019 19:06:16 +0000

Chro-moly Pinion retainer nut for late pinion

The post Cromoly Pinion Retainer Nut Late first appeared on RanchoTransaxles.com.

Auto-Craft Type 1 Case

Bob Clark — Wed, 27 Dec 2017 18:31:46 +0000

Designed primarily for racing applications this-state-of-the-art High Performance Type 1 case manufactured by Auto-Craft and now available from Rancho, is quite literally the Big Dog on the block. The case is a two-piece design made from 356 T-6 aluminum, weighs in at 25 pounds and comes with removable bell housing. Compatible with both IRS and swing axle applications they are significantly more robust than OEM units with added material at all stress locations and features massive supporting gussets both top and bottom. The Auto-Craft case is compatible with just about any clutch, flywheel and crank combination and virtually eliminates flex while providing superior gear support. Just the ticket for those who need the extra strength for track work or just demand the very finest for their ride. The cases were developed for use with factory and aftermarket Type 1 components.

If appearance is a concern these things look AWESOME right out of the box, powder coated or fully polished. As with anything of this caliber they aren’t cheap at $1095.00, but it’s a small price to pay for the impeccable craftsmanship, strength, reliability and hi-tech appearance they provide. Naturally you will also want to use the Auto-Craft gear carrier shown which retails for $275.00.

The post Auto-Craft Type 1 Case first appeared on RanchoTransaxles.com.

HD EMPI Aluminum Rhino Case

Michael Rhodes — Mon, 06 Feb 2017 18:24:28 +0000

If you're going to build your own Hot Rod transaxle you need to start with one of these EMPI VW Rhino cases. 40% stronger than stock, Rhino cases have additional DEEP webbing cast right into the case at high stress points including inside the bell housing. Direct replacement for Beetle / Ghia and Type-3 swing axle tranny case from 1961 to 1969 and Bus from 1961 to 1967.

The post HD EMPI Aluminum Rhino Case first appeared on RanchoTransaxles.com.

Gusseted Aluminum Rhino Case

Michael Rhodes — Mon, 06 Feb 2017 18:22:53 +0000

While the VW Rhino case is reported to be 40% stronger than the mag case our Gusseted Aluminum Rhino goes a step further and provides exceptional strength and durability for those who really run their cars hard. Working with a new Rhino case we custom fabricate a 1/4 thick aluminum gusset and stratigically weld it to the case where they are most prone to breakage. A must for high performance use. Direct replacement for Beetle / Ghia and Type-3 swing axle tranny case from 1961 to 1969 and Bus from 1961 to 1967.

The post Gusseted Aluminum Rhino Case first appeared on RanchoTransaxles.com.